Standard Abrasives Surface Conditioning RC Belt 888017, 2 in x 60 in CRS, 5 ea/Case

Details

• Aluminum Oxide on RC material provides good initial and extended cut rate
• Best material for general use and average pressure usage
• Designed for blending, coating removal, finishing, and light deburring
• Excellent starting point for finishing stainless steel to a #4 finish
• High edge durability and flexibility
• Most efficient on flat surfaces

Product Name: Standard Abrasives™ Surface Conditioning RC Belt 888017, 2 in x 60 in CRS, 5 ea/Case

Product Description: The Standard Abrasives™ Surface Conditioning RC Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. Constructed with enhanced edge durability and flexibility, combined with high initial and extended cut rate, this is a great all-around belt for deburring, blending, cleaning and finishing on composites and softer metals.

RC Construction for Composites and Softer Metals
Featuring a more compact structure of non-woven fibers than Buff & Blend products, our Standard Abrasives™ Surface Conditioning RC Belt is engineered to provide high initial and extended rates of cut, while maintaining edge durability. Constructed of resin-reinforced, non-woven fiber, the belt material resists loading and minimizes under-cutting or gouging of the work piece. Compared with our GP surface conditioning products, RC material offers a faster cut and increased durability for edgework. It is a great choice for general use, delivering a solid mix of durability, flexibility, and cut rate.

We designed FE material with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous metals where final finishing is important.

The Outstanding Performance of Surface Conditioning Material
Surface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.

Aluminum Oxide for Ferrous Metals and Composites
The fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. RC belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).

Recommended Applications
Our Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Choose this belt for use on ferrous metals, softer metals such as aluminum, and composites for:

• Deburring: removing large and micro burrs, edge radiusing, removing die cast flashings
• Blending: removing mill marks, tool marks and mismatches, reducing uneven edges between adjoining surfaces, reorienting surface scratch patterns, creating a smooth transition from one surface profile to another
• Cleaning: removing coatings, gaskets and surface discolorations from welds or other surfaces
• Finishing: conditioning grind lines, reducing surface roughness, polishing welds prior to inspection, applying cosmetic grain finish

Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Technical Specifications:
- Country of Origin: USA
- ECCN Number: EAR99
Logistics and Handling:
- 3M Stock: 7010367124
- Legacy Stock Number: 66000040205
- Sales UOM: Each
- Sales UPC: 00051115364204 (051115364204)
- Smallest Saleable Unit UPC: 50051115364209 (051115364209)
- Shipper UPC: 50051115364209 (051115364209)
- Typical Lead Time: 10 Days
- Shelf Life: 3650 Days
- United States Department Of Transportation Ground (US DOT, 49 CFR): NOT REGULATED
- International Air Transport Association: NOT REGULATED
Additional Information:

RC Construction for Composites and Softer Metals
Featuring a more compact structure of non-woven fibers than Buff & Blend products, our Standard Abrasives™ Surface Conditioning RC Belt is engineered to provide high initial and extended rates of cut, while maintaining edge durability. Constructed of resin-reinforced, non-woven fiber, the belt material resists loading and minimizes under-cutting or gouging of the work piece. Compared with our GP surface conditioning products, RC material offers a faster cut and increased durability for edgework. It is a great choice for general use, delivering a solid mix of durability, flexibility, and cut rate.

We designed FE material with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous metals where final finishing is important.

The Outstanding Performance of Surface Conditioning Material
Surface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.

Aluminum Oxide for Ferrous Metals and Composites
The fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. RC belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).

Recommended Applications
Our Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Choose this belt for use on ferrous metals, softer metals such as aluminum, and composites for:

• Deburring: removing large and micro burrs, edge radiusing, removing die cast flashings
• Blending: removing mill marks, tool marks and mismatches, reducing uneven edges between adjoining surfaces, reorienting surface scratch patterns, creating a smooth transition from one surface profile to another
• Cleaning: removing coatings, gaskets and surface discolorations from welds or other surfaces
• Finishing: conditioning grind lines, reducing surface roughness, polishing welds prior to inspection, applying cosmetic grain finish

Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Important Links:

Flyer
- EU REACH: This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2020.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2021.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2022.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2023.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2024.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2021.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2020.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2022.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2023.
- EU RoHS: This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP.