Standard Abrasives Aluminum Oxide Buff and Blend GP Roll, 830015, BB-GP, Fine, 4 in x 30 ft, 3 ea/Case

Details

• Abrasive may be run wet to help wash away swarf and keep abrasive running cool, minimizing potential for heat-induced smearing and blemishes
• Aluminum Oxide mineral is friable and breaks down to reveal sharp cutting edges for a consistent cut
• Open web is load resistant, reducing the likelihood of abrasive clogging with debris, thereby prolonging service life
• Roll form may be shaped according to application requirements
• Versatile selection of Buff and Blend materials are available to ensure the right roll for each application

Product Name: Standard Abrasives™ Aluminum Oxide Buff and Blend GP Roll, 830015, BB-GP, Fine, 4 in x 30 ft, 3 ea/Case

Product Description: The Standard Abrasives™ Aluminum Oxide Buff and Blend Roll combines nylon strands and aluminum oxide with a resin bond, resulting in an open web that is responsive and durable enough for deburring, cleaning, blending and finishing. Available in a versatile range of grades and sizes, you can choose the right roll for your application.

Choosing the Right Buff & Blend Material
Each of the Standard Abrasives Buff & Blend materials offers unique benefits. Standard Abrasives Buff & Blend materials include: GP, AP, HS and HS-F.

GP is a general purpose material that delivers a high cut rate and consistent finish. It is the most middle-of-the-road, multi-purpose material among all the standard abrasives buff & blend materials. It's great for general-duty applications, like intermediate cleaning, blending, deburring and finishing - striking a balance between aggressive cutting action and fine finishing. AP material is a cut above GP in terms of its aggressiveness, and it will produce a coarser finish than GP material.

HS and HS-F material are both high strength. The material is very tear resistant, so it's a good match for final finishing on irregularly-shaped parts, because it will not break down or fray when it comes in contact with contours and extrusions. HS-F material is the best material for light deburring and finishing, because the fineness of the mineral produces a consistent, soft scratch pattern when sanding brass, steel, bronze and stainless steel surfaces.

Standard Abrasives™ Aluminum Oxide Buff and Blend Rolls come in varying widths, from 1 inch to 38 inches. We purposefully designed these roles in different sizes, so they would fit with a range of sanding tools. Whether the workpiece is large or small, it's likely one of these widths will be a good match for the size of the workpiece. These materials may be used on orbital or straight-line sanders to produce matte and satin finishes or may be cut and shaped for hand-sanding applications.

The Many Benefits of Open Web Abrasives
Every Standard Abrasives™ Aluminum Oxide Buff and Blend Roll features nonwoven nylon strands and aluminum oxide mineral mixed with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. Wear and tear from excess buildup is reduced. Consequently, abrasive service life increases. The open web material is also waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of particles smearing or blemishing the substrate decreases. Rolls may be used on a variety of substrates: ferrous and non-ferrous metals, aluminum, high nickel /chrome alloys and stainless steel. This abrasive is designed to help you tackle your industrial application with efficiency and ease.

Technical Specifications:
- Country of Origin: USA
- ECCN Number: EAR99
Logistics and Handling:
- 3M Stock: 7000046839
- Legacy Stock Number: 66000006610
- Sales UOM: Roll
- Sales UPC: 00051115330605 (051115330605)
- Smallest Saleable Unit UPC: 50051115330600 (051115330600)
- Shipper UPC: 50051115330600 (051115330600)
- Typical Lead Time: 2 Days
- Shelf Life: 3650 Days
- United States Department Of Transportation Ground (US DOT, 49 CFR): NOT REGULATED
- International Air Transport Association: NOT REGULATED
Additional Information:

Choosing the Right Buff & Blend Material
Each of the Standard Abrasives Buff & Blend materials offers unique benefits. Standard Abrasives Buff & Blend materials include: GP, AP, HS and HS-F.

GP is a general purpose material that delivers a high cut rate and consistent finish. It is the most middle-of-the-road, multi-purpose material among all the standard abrasives buff & blend materials. It's great for general-duty applications, like intermediate cleaning, blending, deburring and finishing - striking a balance between aggressive cutting action and fine finishing. AP material is a cut above GP in terms of its aggressiveness, and it will produce a coarser finish than GP material.

HS and HS-F material are both high strength. The material is very tear resistant, so it's a good match for final finishing on irregularly-shaped parts, because it will not break down or fray when it comes in contact with contours and extrusions. HS-F material is the best material for light deburring and finishing, because the fineness of the mineral produces a consistent, soft scratch pattern when sanding brass, steel, bronze and stainless steel surfaces.

Standard Abrasives™ Aluminum Oxide Buff and Blend Rolls come in varying widths, from 1 inch to 38 inches. We purposefully designed these roles in different sizes, so they would fit with a range of sanding tools. Whether the workpiece is large or small, it's likely one of these widths will be a good match for the size of the workpiece. These materials may be used on orbital or straight-line sanders to produce matte and satin finishes or may be cut and shaped for hand-sanding applications.

The Many Benefits of Open Web Abrasives
Every Standard Abrasives™ Aluminum Oxide Buff and Blend Roll features nonwoven nylon strands and aluminum oxide mineral mixed with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. Wear and tear from excess buildup is reduced. Consequently, abrasive service life increases. The open web material is also waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of particles smearing or blemishing the substrate decreases. Rolls may be used on a variety of substrates: ferrous and non-ferrous metals, aluminum, high nickel /chrome alloys and stainless steel. This abrasive is designed to help you tackle your industrial application with efficiency and ease.

Important Links:

Flyer
- EU REACH: This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2020.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2021.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2022.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2023.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective January 2024.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2021.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2020.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2022.; This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective June 2023.
- EU RoHS: This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP.