Bondo Fast Dry Filler FD-GAL-ES, 6.31 lb, 2/Case
Details
Details
Product Name: Bondo® Fast Dry Filler FD-GAL-ES, 6.31 lb, 2/Case
Product Description: Bondo® Professional Fast Dry Filler, FD-GAL-ES, 6.31 lb, 4/case
Bondo® Fast Dry Filler is a professional, high bond formula designed to fill dents, dings, and scratches on your car or around your home faster and easier. The fastest drying Bondo® filler, it can be sanded in just 15 minutes. Bondo® Fast Dry Filler instructions: Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond the damaged area. Clean again with a low VOC compliant cleaner. Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container. Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 15 minutes. Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer.  Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. Step 6: Apply Bondo® Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing.  For best results apply at 45F (7C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552
Technical Specifications:
- Country of Origin: USA
- ECCN Number: EAR99
Logistics and Handling:
- 3M Stock: 7100306451
- Legacy Stock Number: 70009154264
- 3M Catalog Number: FD-GAL-ES
- Sales UOM: Canister
- Sales UPC: 00076308424589 (076308424589)
- Smallest Saleable Unit UPC: 00076308424589 (076308424589)
- Shipper UPC: 50076308424584 (076308424584)
- Typical Lead Time: 2 Days
- United States Department Of Transportation Ground (US DOT, 49 CFR): LIMITED QUANTITY
- International Air Transport Association: UN3269, POLYESTER RESIN KIT, 3, III
Additional Information: Bondo® Fast Dry Filler is a professional, high bond formula designed to fill dents, dings, and scratches on your car or around your home faster and easier. The fastest drying Bondo® filler, it can be sanded in just 15 minutes. Bondo® Fast Dry Filler instructions: Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond the damaged area. Clean again with a low VOC compliant cleaner. Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container. Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 15 minutes. Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer.  Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. Step 6: Apply Bondo® Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing.  For best results apply at 45F (7C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552
Important Links:
- BONDO® BLUE CREAM Hardener included
- FASTEST DRYING Bondo® filler cures to hard-to-stick-to surfaces in 15 minutes for fast and quick repairs
- HIGH BOND WITH EXCELLENT ADHESION to hard-to-stick-to surfaces with excellent vertical hang
- HIGH-ADHESION FILLER works on metal, aluminum, masonry, concrete, and more
- INTERIOR OR EXTERIOR use
- MIXES LIGHT BLUE when hardener and filler are mixed thoroughly and ready to use
- NON-SHRINKING formula is permanently durable
- PAINTABLE FORMULA is compatible with most paints and paint systems
- PREMIUM FORMULA for repairing dents, dings, and scratches around your home or on your car faster and easier
- SANDABLE in 15 minutes for same day repairs
- SMOOTH AND TACK-FREE professional finish
- SPREADS AND SANDS easier than other Bondo® fillers for a consistent, smooth, and professional finish
- TOP COAT with Bondo® Glazing and Spot Putty is recommended to fill pin holes and small imperfections for a smooth finish
- TWO-PART FORMULA chemically bonds and adheres faster to hard-to-stick-to surfaces like galvanized steel
- WORKABLE for 3-4 minutes once filler and hardener are mixed together
Product Name: Bondo® Fast Dry Filler FD-GAL-ES, 6.31 lb, 2/Case
Product Description: Bondo® Professional Fast Dry Filler, FD-GAL-ES, 6.31 lb, 4/case
Bondo® Fast Dry Filler is a professional, high bond formula designed to fill dents, dings, and scratches on your car or around your home faster and easier. The fastest drying Bondo® filler, it can be sanded in just 15 minutes. Bondo® Fast Dry Filler instructions: Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond the damaged area. Clean again with a low VOC compliant cleaner. Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container. Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 15 minutes. Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer.  Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. Step 6: Apply Bondo® Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing.  For best results apply at 45F (7C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552
Technical Specifications:
- Country of Origin: USA
- ECCN Number: EAR99
Logistics and Handling:
- 3M Stock: 7100306451
- Legacy Stock Number: 70009154264
- 3M Catalog Number: FD-GAL-ES
- Sales UOM: Canister
- Sales UPC: 00076308424589 (076308424589)
- Smallest Saleable Unit UPC: 00076308424589 (076308424589)
- Shipper UPC: 50076308424584 (076308424584)
- Typical Lead Time: 2 Days
- United States Department Of Transportation Ground (US DOT, 49 CFR): LIMITED QUANTITY
- International Air Transport Association: UN3269, POLYESTER RESIN KIT, 3, III
Additional Information: Bondo® Fast Dry Filler is a professional, high bond formula designed to fill dents, dings, and scratches on your car or around your home faster and easier. The fastest drying Bondo® filler, it can be sanded in just 15 minutes. Bondo® Fast Dry Filler instructions: Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond the damaged area. Clean again with a low VOC compliant cleaner. Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container. Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 15 minutes. Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer.  Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. Step 6: Apply Bondo® Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing.  For best results apply at 45F (7C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552
Important Links: